Recent content by Clayton.Perry

OK. As I read it the Black wire goes to L2, Red and Blue go to either "A" and L1? Right? - - - Updated - - - Ok. I got it now. Thank you very much for your help and sorry for my confusions!!

I can't tell from the pump on the diagram what is the A, L1 and L2 posts are and which color wires goes to each

Sorry but I'm not an electrician. Does the "A" on the motor mean common? I just want to make sure before I hook up the Black wire to the A post on the motor. What at I understand is L1 is either Blue or Red L2 is either Blue or Red "A" is Black if that is not correct, please tell me which...

The motor is a Century 2 Speed 2.6HP cat B2983 serial 13713J2 part 7-196444-05 type CXCP fr Y56Y PH 1. 230V. - - - Updated - - - With the pictures I sent of the timer can you tell me what the Black, Blue, and Red wires are? Which do I connect to the "A" post on the motor, which to the L1...

Here is a pic of the timer - - - Updated - - - Just so I get this right: Black connects to the "A", Blue to the L1 and RED to the L2?

It is an Intermatic 2 speed timer model T106R

I took a picture of the timer switch and can't figure out how to upload to this discussion - - - Updated - - - I guess it did it automatically. The conduit on the left goes to the motor. I don't know how to tell what's common or hi or low wires at the timer. So don't worry about connecting...

Thanks for the quick reply. This is a new motor with pump. I took the old pump to the store with the wires attached and they took the wire off the old and couldn't remember how they went back on. I reinstalled the motor with pump and wired exactly how I disconnected from the timer box and the...

I have a 2 speed 2.6hp 230V pump that I can't follow how to hook up to the control panel. I have a blue, black, red and green wire from the panel. I know green is ground but it is confusing where the blue , black and red wire connect to the motor. Please help. Clayton