Recent content by Brian A

Hello All I ordered the recommended part and started to take out the panel when I found additional damage elsewhere. I found one of the connections had fried enough for the line to break and the fuse along with the surrounding area is charred. Seems like the panel got fried pretty well...

James and Allen thank you both so much for the quick responses! I will hopefully get it back up and going quickly!

Hello All Thanks in advance for the help. My AquaRite panel went dark this week. I am a novice on these boards but I have replaced the limiter in the past. I couldn’t find a parts diagram that shows what I think is the problem. However I am sure the experts here can confirm if this is the...

Thank you all. I am going to go ahead and order a new motor. I don't believe the drive has been an issue so hopefully replacing the motor will be the last item for a while.

Hi James, Yes, I ordered a new seal plate...thank you. As you can see from my last post the corner of the motor mount broke off due to pitting/corrosion when I was trying to get it clean. Not sure I can just order a replacement to the motor mount without a new motor. Not sure how long that...

Hello All, I may have done it now...was spraying and chinking away the corrosion from the bolts. One corner of the motor connection was pretty deeply pitted and snapped off with what I thought was light hammering in an attempt to loosen. Based on this picture, is this a part I can replace or...

James Thank you! That seems to be the precise issue as both the lower grommets look like the one on the bottom right of your picture. In fact there is so much corrosion that the plate pulled away from both lower bolts freely and those bolts are so corroded onto the mount that I can't remove...

Hello All, My pump had seemingly been running fine for the past ~8 years but I turned it off to switch over for a backwash and when I switched the pump back on it showed an over current error that won't clear. Read through a few threads and found my impeller wouldn't budge. I took the pump...

Jim, I ended up with the S200 and it seems to be working well so far. Just a few spots it doesn't quite get to but easily brushed. Appreciate all of your insights. I am interested in that extra stand you have, maybe we can work something out! Thanks Brian