Recent content by Barlow96

Ive read and read all the posts about clearing the lines and I just want to make sure I will be doing everything correctly (mainly with the position of the MPV)so here goes: I will be using an air compressor and will be plugging into pump basket drain plug (I first have drained all of the water...

I am thinking of going with an E10 and a quick question regarding the filter for the e10 owners out there. Is there any possible way of putting in one of the hair nets (that we are all using in the filter baskets) in the e10 filter box for increased filtration?( in lieu of buying the ultra fine...

Im not sure if you are dealing with the same "issues" I thought I had with my IC40, but it was reading levels all over the place until my pool water reached 61 degrees. my unit is only 9 months old as well and I thought it went bad already. although the manual states 55 degrees (or something...

Is there a sticky for opening an in-ground SWG pool? I thought I read one last fall on here (when reading over the closing of an in-ground pool). I was an expert (well I thought I was) by the end of summer last year for my new in-groud pool using the TFP method and now most of that knowledge...

Thank you for the advise. Greatly appreciated

Just received the tf-100 test kit and here are the results (new pool, just filled and chemicals added three weeks ago): pH 7.5 FC 3 CC .5 TC 3.5 CH 125 TA 90 CYA 40-50 (dot disappeared between these two numbers) I guess the hardness is alittle low (but that shouldnt matter since the pool is...