Thanks for the help here.
I have confirmed I have power to the light so must be a bad light.
I reached out to our pool builder inquiring about length of warranty. He stated warranty was good till end of year. Pool was installed in 2019.
Looks like we will be getting a replacement thank goodness.
Wondering if anyone else has experienced this issue.
Last night I switched my Intellibrite 5g color changing led light on and it turned off immediately and then I couldnt switch it on again using the Screenlogic App.
I tried switching it manually using the button on the Pentair control panel...
Did some more digging,
Is my math correct?
Pump draws 9.3 amps.
230 x 9.3 = 2139 watts
2139 / 1000 = 2.14 kwh
2.14 * 2555 hours /year (avg 7hr/day) = 5468 kwh / year
5468 kwh * .04363/kwh = $239 / yr
Even though I am always running the pump at the non peak times, $239 a year seems...
I have a 2hp 3450rpm motor running my pump currently. I bought a rebuilt motor 5 years ago to do an apples for apples swap when my last motor died. Im guessing the pump will be my next big purchase so I thought I would start thinking about the situation.
Goals: cut electrical costs and decrease...
There are 2 that look like they could be for a volleyball net, as they are directly across from each other about mid way through the pool, and 2 in the deck by the spa. The fifth one is definitely for an umbrell, its in the floating table.
Thanks,
I thought that may be it too, but I have 4 other sleeves around the deck that have 1 1/2" threaded tops. This one is 4", seems excessive for an umbrella, no?
Thanks,
Any ideas what this would be?
It is 4" pvc, cemented into the deck. I cleaned it out and there is a steel rod that sits on the bottom. You can see where it is in relation to my skimmer basket.
Thanks,
Daren