Recent content by anthon

Hi Guys , I have had my pool for 3 years now, and this summer i had to wash out my filter every few weeks to keep the pressure in the system at a reasonable levels. My pool guy said the filters should last longer than 3 years and when he closes the pool for winter he will take some extra care...

*update and Resolved So I never had a chance to test my pump with my rs-485 controller, two week ago I turned off the pump (with breaker) and when I turned it back on, the screen and button turned back on! it works as if If it was never off... not sure why... but happy its back up. I am...

I have the same issue as well. In my case it will takes around 3-4 days before pressures drive back up to 20psi. I cleaned my filter 3 times in the last few weeks. At first, I though I was not doing a good job, but the last time I finger rubbed all the pleats to get all the oil and gunk out...

So after making sure that the drive is stock at my local pool shop, i power-cycle my pump. The Pump re-starts (prime then runs smooth) but still nothing on the panel is still dead i'm Under the impression that the when we choose a setting on the panel the setting is sent to the mainboard of...

I read that someone had found one on Ebay. but for the moment none are listed :( i will check out suntouch.

Hi guys, Something feel off the a top shelf and strait into the screen of my Intellipro Pump :( It cracked the outer Glass, control panel display and buttons are dead, but the circuits looks fine. (the pump didnt stop and is still running) I took it apart carefully this morning and the...