Recent content by amethystisagem

Thanks everyone! Turns out our concrete pad from 2008ish had cracked and over time had become sunken in the center where the crack is, so the pump and motor were not level at the union and would not seal (don't tell him I suggested that). New pad being installed this week for $200 under the...

Will add chlorine, thanks. We found that the impeller turns by hand and motor run spins when not connected to the pump housing. When the motor/pump is connected to the pump housing, we cannot turn the impeller by hand. Checked everything for leaks, replaced seals, etc. Since the pool has...

Hi everyone, Looking for some help with our pool. Hubby has tried a number of things, so I wanted to jump in and see if I can find some help for him (I'm the more tech savvy one so I get to post). The pool has been down about four days now and with this heat, we need to get filtering and...

It sees like the water stopped flowing through the valve. Right now, the floor valves are on (in the same position they have been in) but no water is moving in the clear window. I don't know what that means --- Disregard this. There is water in the valve, I just didn't see it moving, it was so...

The valve has a clear lid. It does have the stick to stop the gears, and it is down flat against the clear cover. We can see that the impeller is not moving though the water is flowing through the valve. First post, apologies for missing information.

Hi TFP, We bought a house one year ago with a 13,000 gallon Hayward pebblesheen salt pool with A&A in floor jet cleaning system and jacuzzi spill. Other than high pH (Arizona) and some scale, we have had no problems with the pool (first time pool owners). Over the past few months, the in...