Recent content by adiadasman

Thanks for the help. I added another gallon of 8.25% at dusk, let it circulate for an hour and then tested. FC is 21.5. I will leave my SWG going overnight to bump let level up a bit more then test again in the morning. I am trying to find a cheaper source for bleach, cleaning up this pool is...

Bump, post pics in thread.

I have been keeping the FC level as high as possible, but I can only really work on the pool in the morning before work and evening after work. I have been adding about a gallon of 8.25% in the morning and evening to keep the FC level above 10. The 7.5 reading was just after work and it was a...

Hey guys, trying to open my pool for the year but I am having trouble getting the water clear. I made the mistake of leaving the pool uncovered for the winter, so it was a swampy mess with lots of debris when I started. Got my CYA and FC up and pool cleared up considerably, eventually the water...

Yes it does. Gauge is new this year, so it is most likely accurate.

The water pressure from the return is about the same after backwashing, slight drop in psi on gauge after, maybe 1psi. I will try backwashing again and if that does not work I will do the deep clean in the sticky. Thank you so much for your help!

Does that mean replacing the sand, backwashing longer, or actually opening the filter to see if there is any large debris?

The water is pretty bad, just getting warm enough to get out and open up here, so I am still SLAMing. I backwashed just today, left it running longer than normal just to make sure everything was out. I am pretty positive that nothing is connected wrong or any valves are wrong as I have spent...