O
Latest activity Postings Media About
-
-
Oogdento reacted to Dan-H's post in the thread replacing easytouch 8 circuit board; a couple of questions with
Like.
Thanks @ogdento I stumbled across the actuator fix a couple of years ago. I had four pentair actuators fail and thankfully had not... -
Oogdento replied to the thread replacing easytouch 8 circuit board; a couple of questions.if the chips don't solve it, it may be worth looking at the microswitches inside the valve actuators... Valve Actuators - Further Reading
-
Oogdento reacted to geobrick's post in the thread How to perform firmware upgrade on Pentair* controllers with Like.
I just updated my EasyTouch to version 2.190 from 2.160. I didn't really need it, but I wanted to see if they fixed whatever the issue...
-
Oogdento replied to the thread Pump 1: Communication Lost / Pump Status: No Comm!.@Pieroz as Allen said they are only sold as a matched pair with that key. I wrote a post about how to reset the code on the "Quest"...
-
Oogdento replied to the thread Is the Pentair Easy Touch remote obsolete?.hey @Jeffrosmit the prices of these things are ridiculous... the Easytouch is obsolete as Pentair is pushing the Intellicenter...
-
Oogdento replied to the thread IC60 & IntelliPH.D3 and 4 are ESD Suppressors / TVS Diodes (part SMAJ6.0CA)... they can be replaced, along with the 8-pin comm chip to their right. If...
-
Oogdento replied to the thread Pentair Easy Touch LCD Screen.Looks great! I've switched to an easier way to pull these off, and no longer use an iron and braid or a solder sucker... I have an...
-
Oogdento reacted to Dirk's post in the thread Pentair ic40, surge board, intelliph and swg transformer. with Like.
Whoa there! Can't say I agree with @Flying Tivo completely. (Perhaps he meant red/black, not red/white.) You don't mess with the white...
-
Oogdento reacted to Latitude22's post in the thread Pentair ic40, surge board, intelliph and swg transformer. with Like.
I snapped this photo of my solder job. I did it differently than other folks here. I didn’t want to drop down a wire size so I cut the...
-
Oogdento reacted to Dirk's post in the thread Pentair ic40, surge board, intelliph and swg transformer. with Like.
We would really like to see a picture of that, the next time you're snooping around inside the controller.
-
Oogdento replied to the thread IntelliTouch i9+3 not communicating with Intelliflow VSF pump.ok, so this means the screenlogic cannot read from the outdoor board... it could be the screenlogic or the outdoor board, but my money...
-
-
Oogdento replied to the thread IntelliTouch i9+3 not communicating with Intelliflow VSF pump.from the first post I see that the screenlogic reports firmware 1190, which is the latest... so that won't need to be updated. In...
-
Oogdento replied to the thread IntelliTouch i9+3 not communicating with Intelliflow VSF pump.on my pool the Intelliflo is wired for continuous power and the filter relay is used to turn on my Aquarite salt cell (which is not...
-
Oogdento replied to the thread IntelliTouch i9+3 not communicating with Intelliflow VSF pump.i just re-read my post and want to clarify that the personality board diode has nothing to do with the board's "logic supply"... it just...
-
Oogdento replied to the thread IntelliTouch i9+3 not communicating with Intelliflow VSF pump.just to expand on a couple of Allen's answers... IF a comm chip has failed, it is possible for it to fail in such a way that it can...
-
-
Loading…
-
Loading…
-
Loading…
