1
Latest activity Postings Media About
-
-
11poolman1 replied to the thread Safety of pool slide.Not a fan of slides in any case. After not being able to get liability insurance from any carrier for a slide or boards installation...
-
11poolman1 replied to the thread Sta-Rite heater won't restart after reaching temp.Best guess is that the thermister (temp sensor for the heater) is failing. Easy repair. You'll never find a better price for OEM...
-
11poolman1 replied to the thread Where else to look for leak?.Would need to see a picture of the return fitting. Do they unscrew? If so, the pipe is probably a 1.5" female adapter. These can be...
-
11poolman1 replied to the thread Safety of pool slide.The nozzles that spray the water are easily clogged and that may be the issue. Easy to remove the tube from under the slide and clear them.
-
11poolman1 replied to the thread LED Remote Control.Depending on which bulb was installed, a quick off-on when a color you like appears will usually stop the cycling. Some bulbs...
-
11poolman1 replied to the thread Mastertemp combustion chamber O-ring installation.New silicone won't stick to old. All of the old has to be removed. It has to flow as the cover is installed in order to seal properly...
-
1Of course it makes a difference, but it's not going to let a pool stay at 80 degrees when the air temperature is consistently below...
-
11poolman1 replied to the thread Is a new pump worth it?.Those old Max/Dyna-E-Glas 1 pumps were excellent pumps. Not sure why yours has a Pac-Fab/Pentair Challenger pot lid. Would be worth...
-
-
11poolman1 replied to the thread Easytouuch 8 Heater Overshoot.Give this a try. At this price you'll know that it isn't the problem...
-
11poolman1 replied to the thread Spa Booster Pump single speed Max-E-Pro Moter needs to be replaced - is VS my only option now in CA?.Century EVQ165 with Century Connect should work with your automation. Be sure that it is labeled on the box, they first came out without...
-
11poolman1 replied to the thread Easytouuch 8 Heater Overshoot.Could be a bad water-temp sensor. How did you measure the temperature?
-
11poolman1 replied to the thread Where else to look for leak?.If you can, start isolating the plumbing lines. Put plugs in the returns and leave the system off, obviously. No change, put a plug in...
-
11poolman1 replied to the thread The Ghost in the Machine is Back.......Might try to disconnect any of the red RS-485 connectors on the left upper side of the board so that there are no inputs. If the problem...
-
-
Loading…
-
Loading…
-
Loading…
