P
Latest activity Postings Media About
-
-
Pphonedave replied to the thread Screw in bead liner receivers?.I see no benefits to using an in ground bead receiver in an above ground pool, and I see LOTS of downside.
-
Pphonedave replied to the thread Featured Bonding and grounding.Aside from the fact that there is a ground rod in that picture, which is a big no. The code for bonding water is as follows 680.26(C)...
-
Pphonedave replied to the thread Tips/Suggestions for patching the bottom of a pool liner (from nut sedge growth).To be clear, when you fold it in half, the cement is on the inside, that protects it from washing off. Then when you get into the water...
-
Pphonedave replied to the thread What’s your water temp - Spring 2024 edition.It is a balmy 47F in NJ right now. I suspect my pool is somewhere in the 40's. I don't even think about opening until May. Me, I...
-
Pphonedave reacted to ajw22's post in the thread What’s your water temp - Spring 2024 edition with
Like.
Water temp 52F in NJ. Air temp 65F at noon. -
Pphonedave reacted to V___25's post in the thread What’s your water temp - Spring 2024 edition with Like.
:oops::oops: {{jealousy}} I'll get in at 78! I'd prefer 80 but we won't get there until July if we're lucky. Right now, it's still too...
-
Pphonedave replied to the thread Hot tub Filter Cleaning.I use about a 1/3 cup of Oxy Clean in 5 Gal of water and let them soak 24 hours. Then I rinse, dry, and store. You don't want to store...
-
Pphonedave replied to the thread Tips/Suggestions for patching the bottom of a pool liner (from nut sedge growth).Cut your patch round, not with sharp corners. The corners are where things begin to pull up. Get something heavy that sinks that has a...
-
Pphonedave replied to the thread Featured Bonding and grounding.Bonding is for different potentials, which do not necessary have to come from energized equipment You should have the following: A...
-
PI had done that. and pre marked lines and septic from when I had the install done myself with flags as well as a sketch and video of...
-
Pphonedave replied to the thread Pool stairs.Do you have any issues with them at all when you leave them in? Do they move, or get frozen in place? I would love to leave mine in...
-
Pphonedave replied to the thread Screw in bead liner receivers?.Usually for in ground pools https://www.propools.com/product/vinyl-liner-track-smw-s08x15-side-mount-aluminum/53787
-
Pphonedave replied to the thread Featured Bonding and grounding.You may want to call 811 before driving a ground rod. I have seen them go through a number of things - storm drains, sanitary sewers...
-
Pphonedave replied to the thread Steps for above ground pool.It must be stairs season. This is about the 4th time I have posted this picture in the last week. This is how I did mine. I did not...
-
-
-
Loading…
-
Loading…
-
Loading…
