Latest activity Postings Media About
-
-
mas985 replied to the thread Failing T-15 SWG Cell Experiment.Maybe if I had nothing better to do and owned a plumbing supply warehouse. -
mas985 replied to the thread Failing T-15 SWG Cell Experiment.From my perspective, if a single cell were not able to keep up, I would just replace the cell. Too much work vs benefit.
-
mas985 replied to the thread Failing T-15 SWG Cell Experiment.Why bother? T-5 Mode works perfectly well.
-
mas985 replied to the thread High FC and TA, What should I try to tackle first....With current FC levels, I would shut it off until FC drops. Without any alarming the SWG is fine, no worries. It will drop with rain...
-
mas985 replied to the thread Failing T-15 SWG Cell Experiment.So why is that a problem? There is plenty of warning before the cell completely fails in T-5 mode. At <2700 ppm salt reading, a low salt...
-
mas985 replied to the thread High FC and TA, What should I try to tackle first....Turn on the SWG and see if it alarms. The unit will shut down on it's own if it is too high. I don't think it will be an issue at the...
-
mas985 replied to the thread Failing T-15 SWG Cell Experiment.Yes, I am configuring the controller for a T-5 cell (smaller) even though the old cell is a T-15 model (larger). As SWG cells age, they...
-
mas985 reacted to ajw22's post in the thread Hayward T-3 working but still reads low PPM, why? with
Like.
Check that the cell type is correctly set int he controller. -
The other day I got curious. I know there are three houses with pools right in a row up the street from me. So I started looking...
-
mas985 replied to the thread Hayward T-3 working but still reads low PPM, why?.Usually, it is one of two reasons: 1) Dirty cell. Remove cell and inspect for calcium deposits. If dirty, clean. I use bamboo skewers...
-
Maybe the gas valve is defective and it works when pointing up but not on its side? The fan will pull the gas into the holes so the gas...
-
mas985 replied to the thread Hayward H400 - Bizzare Issue + IF code.The odd part is that it fires with the nozzles tilted away from the burners but does not fire when the nozzles are in the correct...
-
mas985 replied to the thread Hayward H400 - Bizzare Issue + IF code.Yes, it does have a green wire:
-
-
-
-
-
Loading…
-
Loading…
-
Loading…
