Latest activity Postings Media About
-
-
mas985 replied to the thread SWG and pH..An SWG creates hydrogen gas bubbles, when it is actively generating chlorine, and gas bubbles increase the surface area of the air/water... -
Your TA will lower itself without any effort if you just manage the pH and not add any more baking soda. No reason to lower it any...
-
mas985 replied to the thread No flow and no pressure on filter.Is there water in the pump basket up to the level of the inlet pipe? If so, then there is probably something wrong with the impeller...
-
mas985 replied to the thread No flow and no pressure on filter.If the pump stops after 10 seconds, then the problem is with the pump. Does the pump display show any sort of error after it shuts...
-
mas985 replied to the thread No flow and no pressure on filter.Is the pump running? Were you doing anything to the equipment prior to this happening? Assuming the pump is running, when there is...
-
just so there’s no confusion- you don’t add de to the sand when you’re installing the sand. If you wish to add pool grade de you mix it...
-
mas985 replied to the thread New sand filter… add DE???.I wouldn't bother unless there is a specific reason you need it. There is no guarantee that you will see a difference but you can try it...
-
mas985 replied to the thread New sand filter… add DE???.Usually a 1-2 PSI rise is sufficient but why do you want to add DE to the filter? Most people only add DE to a sand filter after an...
-
mas985 reacted to Newdude's post in the thread Measuring Gallons Per Minute for Variable Speed Pump with
Like.
Sorry. We don't get out much because so much of the industry advice is garbage. We pretty much stay here and assumed you got it here... -
mas985 replied to the thread Measuring Gallons Per Minute for Variable Speed Pump.Turnover is not important for sanitation and circulation. https://www.troublefreepool.com/wiki/index.php?title=Turnover_of_Pool_Water
-
mas985 replied to the thread Measuring Gallons Per Minute for Variable Speed Pump.Nope. Where did you read that? Not really needed. The way to setup a VS pump for lowest energy use is to set the RPM to the lowest...
-
mas985 replied to the thread Dedicated Spa Jets Pump.With 10 spa jets and bypassing the heater, you really should be able to get more than 70 GPM. What size pipe did they use for the...
-
-
-
mas985 replied to the thread My Aqua Logic (AQL-PS-8) keeps going into Service Mode when running Aux 3 Edge Pump.I have had the AquaLogic for almost 20 years now and never had something like that happen but I am a bit curious. I had one keypad fail...
-
mas985 replied to the thread Dedicated Spa pump VS or single speed.I think those are 5/16" 10 GPM jets: https://www.waterwayplastics.com/manuals/810-0339.0512.pdf Assuming a dedicated Intelliflo3...
-
-
-
Loading…
-
Loading…
-
Loading…
