1poolman1's latest activity
-
11poolman1 replied to the thread Filter pressure after transition to cellulose fiber.Its not unusual at all for the pressure to be much less with cellulose fiber, as long as the correct amount was added. First started...
-
-
11poolman1 replied to the thread The Ghost in the Machine is Back.......Do a review of all the programs in the system. Many times, when trying to troubleshoot, overlapping programs are inadvertently set...
-
11poolman1 replied to the thread Hayward GV-24 actuator on Dial-a-Flo?.Edit. Was thinking Vari-Flo. The stem of a Dial-A-Flo diverter is much different than a Jandy-type that the actuator is made for.
-
11poolman1 replied to the thread The Ghost in the Machine is Back.......Do you have a spa-side button? If so, disconnect it in the panel. It is a 6-conductor plug, usually brown. They can cause the issues you...
-
11poolman1 replied to the thread SWP-Pro Logic PS8 does not turn on Acid Dispenser.What is the condition of the sensors? When were they last cleaned? The Sense and Dispense may not be getting a signal indicating that...
-
11poolman1 replied to the thread Filter pump is not completely filled with water.When was the filter last cleaned? That should always be the first place to look.
-
11poolman1 replied to the thread What order to plumb electrical heater..Do you have an attached spa? Makes a difference in where the booster gets its water.
-
11poolman1 replied to the thread pump above pool water line.A check valve in front of the pump would be a good idea as it would keep water in the pump after it shuts down each day. The further...
-
-
1Yikes! I ordered that. And yesterday I had shut the gas off and the side panel power switch is off and its not currently wored to the...
-
11poolman1 replied to the thread Best pool cleaner for heavier debris?.If the Polaris is floating, that usually indicates a suction leak injecting air into the system that gets into the Polaris and...
-
11poolman1 replied to the thread Polaris pressure relief valve.Check the O ring inside the fitting. They will sometimes get out of shape, or break, and then you will get a whistle as well. If it is...
-
11poolman1 replied to the thread Polaris360 connecting to my 37 ywar old Anthony Pool.If you have 1.5" return plumbing, you can use this kit. In order to get a 360 to work using a return line, other returns will have to be...
