Latest activity Postings Media About
-
-
JJamesW reacted to Newdude's post in the thread Way to directly test if Bromine is present? with
Like.
I deleted the old post so it's never is an issue again. I have a love/hate relationship with old threads. Sometimes they aged well... -
JJamesW replied to the thread Way to directly test if Bromine is present?.The zero CYA result indicates low or no tab use. The 600 salt indicates about 370 ppm FC from liquid chlorine, which might be from...
-
JJamesW replied to the thread Way to directly test if Bromine is present?.It might be a fresh fill. Unless you see bromine tabs onsite, I would not think that bromine was used. Can you test all fill water...
-
JJamesW replied to the thread Accidentally put Degreaser in pool.Exact product?
-
JJamesW replied to the thread Aquarite goldline contrôler.Made November 2008. 16 years old. You can replace the thermistor. Tell the neighbor that you will pay them after you verify that it...
-
JJamesW reacted to WaynePool's post in the thread Need Diverter Valve Shaft Assembly 2.5” - 3” with Like.
Thanks James.
-
JJamesW replied to the thread Dirty looking plastic drain covers.Probably iron. Try vitamin C (Ascorbic Acid).
-
JJamesW replied to the thread Yellow Out chlorine question.
-
JJamesW replied to the thread Yellow Out chlorine question.Which exact Taylor test kit? What does CTC mean? Is it ammonia or bromide?
-
JJamesW reacted to ajw22's post in the thread Hayward T-3 working but still reads low PPM, why? with Like.
Check that the cell type is correctly set int he controller.
-
JJamesW replied to the thread Size of circuit needed for sub panel.Aquacal, Raypak or Pentair Ultratemp should be good. I highly recommended that you get a local Authorized dealer to install. I would...
-
JJamesW replied to the thread Size of circuit needed for sub panel.In my opinion, a # 4 AWG copper wire (75 C rated) with an 80 amp breaker should be good for the supply for the subpanel. You can use #...
-
-
-
Loading…
-
Loading…
-
Loading…
