It is currently May 24th, 2012, 4:16 pm

All times are UTC - 6 hours [ DST ]



 Page 1 of 1 [ 4 posts ] 
Author Message
 Post subject: Looking for a well sealed LED pool light
PostPosted: January 31st, 2012, 6:30 pm 
In The Industry & Platinum
In The Industry & Platinum
User avatar

Joined: June 26th, 2010, 2:08 pm
Posts: 432
Had disastrous experience with Hayward Color Logic lights leaking and would still like LED but they would need to be well sealed like the regular white pool lights are. If water gets in it corrodes the LED circuit board.

Are there any LED's out there that don't leak?

Any help is much appreciated ! Thanks!



_________________
balance here: http://www.poolcalculator.com/
hayward error info: http://www.manulabo.com/Hayward/indexen.htm
Offline
 Profile  
 
 Post subject: Re: Looking for a well sealed LED pool light
PostPosted: January 31st, 2012, 11:34 pm 
In the Industry

Joined: January 24th, 2012, 12:21 pm
Posts: 96
We've had quite a few issues with those lights. If we sell an LED light we go with the intellibrite. Haven't had any issues with them and people love them in the pool compared to old incandescents.



_________________
25K aggregate IG, Intellipro, FNS48, Polaris 360, PG2000 fiber optic light source
Offline
 Profile  
 
 Post subject: Re: Looking for a well sealed LED pool light
PostPosted: February 1st, 2012, 8:53 am 
In The Industry & Platinum
In The Industry & Platinum
User avatar

Joined: June 26th, 2010, 2:08 pm
Posts: 432
thepoolman wrote:
We've had quite a few issues with those lights. If we sell an LED light we go with the intellibrite. Haven't had any issues with them and people love them in the pool compared to old incandescents.


Many thanks poolman. yes we were just looking at them. They look well sealed and our supplier assures us we wont have the same problem as we had with the color logics.

Thanks again! 8-)



_________________
balance here: http://www.poolcalculator.com/
hayward error info: http://www.manulabo.com/Hayward/indexen.htm
Offline
 Profile  
 
 Post subject: Re: Looking for a well sealed LED pool light
PostPosted: April 1st, 2012, 3:21 am 
Lifetime Supporter
Lifetime Supporter

Joined: September 7th, 2007, 4:56 pm
Posts: 309
Location: Lafayette, Louisiana
Hello,
I've had three Colorlogic 2.5's go out since I installed my pool about 3 years ago. Same problem, flooded housings. Now the new 4.0's don't cinc up to the old ones, so I'll have to replace both of them??? I don't think so Hayward... Bye bye...

If I'm going to order two, they won't be Haywards...think I'll try the Intellibrites.

Jim



_________________
Fortune favors the well prepared

The build...
viewtopic.php?t=3974
Freeform 24' x 38' IG gunite. 3 1/2' to 8' deep. 28,500 gallons. AutoPilot Total Control SWCG. Pentair Intelliflo VF. Pentair CCP520 cartridge filter. Colorlogic LED lights. Tahoe Blue Diamond Brite. 1200 sq ft stamped concrete deck.
More details as they happen...
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 4 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  


TroubleFreePool.com The Web