|
It is currently May 24th, 2012, 4:12 am
|
 |
|
 |
|
| Author |
Message |
|
slavka001
|
Post subject: How does IntelliBrite 5G connect to EasyTouch?  Posted: November 8th, 2011, 6:09 pm |
Joined: August 3rd, 2011, 3:07 pm
Posts: 37
Location: Mechanicsburg, PA
|
|
I am reading manuals but yet to find one how the lights are connected to the Easy touch. I am suspecting lights are connecting to the AUX relays.
True?
if I have two lights, do I parallel them or connect to different AUX relays?
Help would be appreciated. I am taking care of all the electrical connections and that one is so far a mistery to me.
_________________
IG double roman vinyl 40x20. 35000 gal. 9' deep. Diving board.Pentair 400HD gas heater, ItelliFlow Variable Flow pump, 520 cartridge filter, two pentair G5 lights, IC60 SWG cell.
Photo album: http://slava.no-ip.org/~poolpic/photo
|
|
|
|
 |
|
PoolGuyNJ
|
Post subject: Re: How does IntelliBrite 5G connect to EasyTouch? Posted: November 8th, 2011, 6:44 pm |
| Special Contributor |
 |
Joined: May 20th, 2007, 4:29 pm
Posts: 3053
Location: South Central NJ
|
|
Just tell the EZT that the aux is an Intellibrite. If you have two in the pool, I would put them both on the same relay. If you have a spa, I would put it on a separate relay if you have the space.
Scott
_________________
Owner of - PoolGuyNJ LLC
Expert Pool and Spa Repairs, Renovations, and Augmentation. Helping people decide what is the right gear for meeting their needs. Expectations Set, Expectations Met, No Surprises.
|
|
|
|
|
|
|
slavka001
|
Post subject: Re: How does IntelliBrite 5G connect to EasyTouch? Posted: November 8th, 2011, 9:51 pm |
Joined: August 3rd, 2011, 3:07 pm
Posts: 37
Location: Mechanicsburg, PA
|
PoolGuyNJ wrote: Just tell the EZT that the aux is an Intellibrite. If you have two in the pool, I would put them both on the same relay. If you have a spa, I would put it on a separate relay if you have the space.
Scott Great!!! Thank you. I will just power them from the same AUX relay. I could not believe pentair did not have a single instruction in EZT or Intellibrite manual.
_________________
IG double roman vinyl 40x20. 35000 gal. 9' deep. Diving board.Pentair 400HD gas heater, ItelliFlow Variable Flow pump, 520 cartridge filter, two pentair G5 lights, IC60 SWG cell.
Photo album: http://slava.no-ip.org/~poolpic/photo
|
|
|
|
|
|
|
satx66
|
Post subject: Re: How does IntelliBrite 5G connect to EasyTouch? Posted: November 10th, 2011, 11:47 pm |
Joined: July 30th, 2011, 11:45 pm
Posts: 38
Location: San Antonio, TX
|
|
when setting them up on the EZT, make sure you go into the lights menu >config and enter the lights there (as well as the 'Intellibrites' in the settings menu).... mine weren't syncing until I did that
_________________
12K Gal IG, Gemstone pebble, Intelliflow VF, Whisperflow, Quad 60 DE, Easy Touch 8, Intellibrites, Platinum Legend.
|
|
|
|
|
|
|
Dan-H
|
Post subject: Re: How does IntelliBrite 5G connect to EasyTouch? Posted: November 11th, 2011, 2:43 am |
| Lifetime Supporter |
 |
Joined: May 28th, 2011, 8:06 pm
Posts: 36
Location: No. CA
|
satx66 wrote: when setting them up on the EZT, make sure you go into the lights menu >config and enter the lights there (as well as the 'Intellibrites' in the settings menu).... mine weren't syncing until I did that same thing with any lights. without doing this all lights on/off don't work...
_________________
Pool IG 16,000 gallon (33 x 16) Spa IG 700 gallon spa - Dark Plaster
Sta-Rite IntelliPro VS 3050, Pentair Easy Touch 8, Intellichlor IC40
Purex FNS Plus 60 sq ft DE 150 GPM (rating from manual) Lars Lx400 NatGas heater, Fafco Solar panels
Jandy Ray-Vac (days are numbered...) Klean Machine ( may be returned )
|
|
|
|
|
|
|
|
 |
|
 |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
RSS Feed 
