It is currently May 24th, 2012, 2:03 am



 Page 1 of 1 [ 6 posts ] 
Author Message
 Post subject: help me choose a SWG
PostPosted: November 27th, 2011, 12:32 pm 
Registered User

Joined: April 25th, 2010, 12:05 am
Posts: 51
Location: Sunny Phoenix AZ
Hi guys,

In the spring I am planning on installing a SWG because my pool runs through a gallon of chlorine/day during the summer and dealing with the expense and holding the inventory is getting old.

A couple of questions for you.

Given my pool size and my typical run time of only 6 hrs/day on the pool pump, which specific SWG would you recommend? Are there other things needed other than the SWG unit and salt for the pool?
Really my only criteria are reliability/longevity, ability to turn it down to an appropriate level during the winter. I have a feeling there is a lot I don't know about running one of these bad boys so I'm looking for specific recommendations to the extent that you can give them!

Also, I'm pretty handy, is this something I can attempt myself or is it worth paying someone to do it?
Thanks guys!!!



_________________
28,000 gallons / Plaster / Hayward 30" Sand Filter / PoolCleaner 4x / PoolSkim / Hayward RS1500 / CircuPool RJ60
Offline
 Profile  
 
 Post subject: Re: help me choose a SWG
PostPosted: November 27th, 2011, 1:12 pm 
Special Contributor
Special Contributor

Joined: May 20th, 2007, 4:29 pm
Posts: 3053
Location: South Central NJ
Pentair IC-60. It has the capacity. You already know the chemistry. It won't change.

Scott



_________________
Owner of - PoolGuyNJ LLC
Expert Pool and Spa Repairs, Renovations, and Augmentation. Helping people decide what is the right gear for meeting their needs. Expectations Set, Expectations Met, No Surprises.
Offline
 Profile  
 
 Post subject: Re: help me choose a SWG
PostPosted: November 27th, 2011, 1:19 pm 
Registered User
User avatar

Joined: April 14th, 2011, 2:30 pm
Posts: 494
Location: Lakeland, FL
I've installed the Compupool CPSC48 and I've been happy with the performance. The price was right also.
Here's a link to my install:http://www.troublefreepool.com/cpsc48-install-t32089.html



_________________
17K Kidney Shaped Pool Concrete (Diamond Bright) Pool, 3/4 hp Sta-rite Duraglas PEA5D-180L, 1.5 piping, Pentair CC100 Filter , Heat Siphon 100K BTU Heat Pump Pool Heater , SWCG CPSC48, SmartPool Nitro SmartKleen NC22 robotic pool cleaner, Lakeland Florida
Offline
 Profile  
 
 Post subject: Re: help me choose a SWG
PostPosted: November 27th, 2011, 1:25 pm 
Site Admin
Site Admin
User avatar

Joined: May 7th, 2007, 3:03 pm
Posts: 23753
Location: Silver Spring, MD
I don't recommend the IC-60 unless you have a Pentair automation system. Without an automation system it only provides very coarse 20% adjustment steps.

The CompuPool units are very reasonably priced and have a good reliability record. It is also worth looking at the AquaRite.



_________________
19K gal, vinyl, 1/2 HP WhisperFlo pump, 200 sqft cartridge filter, AutoPilot Digital SWG, Dolphin Dynamic cleaning robot
TFP Admin. Creator of The Pool Calculator. Other handy links: Support this site, TF Test Kits, Pool School
Offline
 Profile  
 
 Post subject: Re: help me choose a SWG
PostPosted: November 28th, 2011, 8:56 am 
Lifetime Supporter
Lifetime Supporter

Joined: June 24th, 2011, 11:50 am
Posts: 136
Location: So Cal
Will the IC-60 produce more chlorine in a shorter run time than the smaller units?

I ask this due to the fact that dombey needs a full gallon of chlorine everyday during the summer. I have to run my Jandy 1400 unit 15 hours a day at 80% output to keep up with my chlorine demand. My wife teaches lessons all day long and that just eats up our chlorine. Being in California our electric rates are high and we were paying $180 more a month this summer to run the pool. The lessons more than made up for that though.

What I'm getting at is this; will dombey have to have a significant longer on time with the smaller cell or will he be better off with the larger cell? With my limited knowledge, the larger IC-60 cell might be the best option.



_________________
16k gal gunite plaster w/spa IGP, Jandy DEV60 filter, 2.5 HP 2-speed Jandy Stealth pump
Jandy Aquapure 1400 SWG, Jandy LXi 400k BTU NG heater, 9 Sun Star solar panels
TF-100 test kit
Offline
 Profile  
 
 Post subject: Re: help me choose a SWG
PostPosted: November 28th, 2011, 12:19 pm 
Registered User
User avatar

Joined: April 14th, 2011, 2:30 pm
Posts: 494
Location: Lakeland, FL
Here's a couple links that attempt to compare outputs of different SWCG.
http://faq.poolforum.com/products/salt-water-chlorine-generators-compared
http://www.discountsaltpool.com/Full_Market_Comparison.htm

Couple of things to keep in mind:
1. Pump run time. SWCG only runs if you have water moving (pump on) If you only run your pump 8 hours a day that"s 1/3 of the day.
2. SWCG have a fixed life span. They will only produce so much chlorine before they need to have the plates replaced. Think of beer can, it has 12 ounces, you can guzzle it down all at once or stretch it out over time. (not the best analogy) but hopefully you'll get the idea. Approximately if it will last 2 years at 100% theoretically it should last 4 years at 50% output.
3. Bigger is better to a point. The daily output is rated for 24 hours. I think most people only run their pump 8 - 12 hours a day so they tend to up size the SWCG to compensate the hourly output. It's easier/cheaper to turn down the output than increase the pump run time.

Usually the cost to go up in size is only a couple hundred dollars. Which if it increases the life of the cell because you can run lower production levels. It works out to be cost effective. Also if you need to boost up the level it's there. Some SWCG have a boost function to increase the chlorine production but I feel it's better to use liquid bleach at those times. (Unexpected high bather load or when you want to to shock.) The greatest thing is it maintains a steady level of chlorine in the pool. So you don't have to shock because the chlorine level got too low.


I don't sell compupool I have one and like it. Here's a link to the company with output levels.http://www.compupoolproducts.com/product/salt_water-cpsc_self_cleaning.html
I'm not but it looks like the CPSC48
Chlorine output: 2.5 lb / day (1.1 kg / day)
Running Cost: 460 Watt / 1.5 amp
Suitable for pools up to 60,000 gallons (250,000 litres)

CPSC36
Chlorine output: 1.9 lb / day (0.85 kg / day)
Running Cost: 320 Watt / 1.2 amp
Suitable for pools up to 40,000 gallons (160,000 litres)



_________________
17K Kidney Shaped Pool Concrete (Diamond Bright) Pool, 3/4 hp Sta-rite Duraglas PEA5D-180L, 1.5 piping, Pentair CC100 Filter , Heat Siphon 100K BTU Heat Pump Pool Heater , SWCG CPSC48, SmartPool Nitro SmartKleen NC22 robotic pool cleaner, Lakeland Florida
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 6 posts ] 


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  


TroubleFreePool.com The Web