It is currently May 19th, 2013, 10:52 pm

Board index » Equipment - Build, Use, and Repair » Pumping Station

All times are UTC - 6 hours [ DST ]


 Page 1 of 1 [ 5 posts ] 
Print view Previous topic | Next topic
Author Message
x2rider
 Post subject: Hayward super pump jumper for 220
PostPosted: April 22nd, 2012, 12:46 pm 
Lifetime Supporter
Lifetime Supporter
User avatar

Joined: June 19th, 2011, 8:20 am
Posts: 131
Location: Bartlesville, OK
I need to know which way to move the jumper since the plastic broke


You do not have the required permissions to view the files attached to this post.


_________________
~26700 gal 18x36 rectangle In-Ground built in 1978
Vinyl liner, 3/4hp Hayward Super pump, single speed 3450rpm
Sand Filter: 300 pound sta-rite T-240BP-1, 3.14 sqft surface area
Compupool CPSC48 SWG installed 3/26/2012
K-2006 Test kit

"Shocking" is medicating your pool until its well.
Offline
 Profile  
 
x2rider
 Post subject: Hayward super pump jumper for 220
PostPosted: April 22nd, 2012, 12:47 pm 
Lifetime Supporter
Lifetime Supporter
User avatar

Joined: June 19th, 2011, 8:20 am
Posts: 131
Location: Bartlesville, OK
Pic 2


You do not have the required permissions to view the files attached to this post.


_________________
~26700 gal 18x36 rectangle In-Ground built in 1978
Vinyl liner, 3/4hp Hayward Super pump, single speed 3450rpm
Sand Filter: 300 pound sta-rite T-240BP-1, 3.14 sqft surface area
Compupool CPSC48 SWG installed 3/26/2012
K-2006 Test kit

"Shocking" is medicating your pool until its well.
Offline
 Profile  
 
x2rider
 Post subject: Hayward super pump jumper for 220
PostPosted: April 22nd, 2012, 12:49 pm 
Lifetime Supporter
Lifetime Supporter
User avatar

Joined: June 19th, 2011, 8:20 am
Posts: 131
Location: Bartlesville, OK
Can't post more than 1 pic at a time in tapatalk


You do not have the required permissions to view the files attached to this post.


_________________
~26700 gal 18x36 rectangle In-Ground built in 1978
Vinyl liner, 3/4hp Hayward Super pump, single speed 3450rpm
Sand Filter: 300 pound sta-rite T-240BP-1, 3.14 sqft surface area
Compupool CPSC48 SWG installed 3/26/2012
K-2006 Test kit

"Shocking" is medicating your pool until its well.
Offline
 Profile  
 
x2rider
 Post subject: Hayward super pump jumper for 220
PostPosted: April 22nd, 2012, 12:52 pm 
Lifetime Supporter
Lifetime Supporter
User avatar

Joined: June 19th, 2011, 8:20 am
Posts: 131
Location: Bartlesville, OK
Labek


You do not have the required permissions to view the files attached to this post.


_________________
~26700 gal 18x36 rectangle In-Ground built in 1978
Vinyl liner, 3/4hp Hayward Super pump, single speed 3450rpm
Sand Filter: 300 pound sta-rite T-240BP-1, 3.14 sqft surface area
Compupool CPSC48 SWG installed 3/26/2012
K-2006 Test kit

"Shocking" is medicating your pool until its well.
Offline
 Profile  
 
x2rider
 Post subject: Re: Hayward super pump jumper for 220
PostPosted: April 22nd, 2012, 9:27 pm 
Lifetime Supporter
Lifetime Supporter
User avatar

Joined: June 19th, 2011, 8:20 am
Posts: 131
Location: Bartlesville, OK
Got the motor & SWG swapped to 220! :D Now hopefully the breaker won't trip occasionally.

Found what I needed here to make sure the wiring was correct... http://www.inyopools.com/HowToPage/how_ ... _pump.aspx
Taped all the connections up real good for now until I can see about getting a replacement part, although as you can tell, this motor has been in use for some time. I think the plastic broke from getting brittle from heat.

The motor does have some bearing whine now & then, but it would also be nice to have a dual speed pump, so not sure what the best route to go. Didn't want to spend a lot of money for a new pump this year, since I just spent $$ on the SWG.



_________________
~26700 gal 18x36 rectangle In-Ground built in 1978
Vinyl liner, 3/4hp Hayward Super pump, single speed 3450rpm
Sand Filter: 300 pound sta-rite T-240BP-1, 3.14 sqft surface area
Compupool CPSC48 SWG installed 3/26/2012
K-2006 Test kit

"Shocking" is medicating your pool until its well.
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 5 posts ] 

Board index » Equipment - Build, Use, and Repair » Pumping Station

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 0 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  


TroubleFreePool.com The Web