It is currently February 4th, 2012, 3:02 am



 Page 1 of 1 [ 6 posts ] 
Author Message
 Post subject: A good ladder for inground Salt water pool?
PostPosted: March 18th, 2010, 11:21 am 
Registered User
User avatar

Joined: July 4th, 2009, 10:29 am
Posts: 21
Mine has rust on the plastic steps, most likely from the bolts on the steps. I have metal issues and this is my suspect. Can someone recommend a good ladder for inground SWCG pools? I found on especially for SW through google and can't seem to re-find it.



_________________
40'x20'x8' to 3', Vinyl IG with brick coping, built/opened 04/2006
Hayward S244T Pro-series 300lb Sand Filter - vari-flo XL valve
Goldline Controls Aquarite Turbo Cell SWG t-cell 15
Hayward SP2607X10 Pump w/ Century Centurion .75HP motor (4th motor in 4 years all under warranty) Polaris 360
Offline
 Profile  
 
 Post subject: Re: A good ladder for inground Salt water pool?
PostPosted: March 18th, 2010, 11:37 am 
Site Admin
Site Admin
User avatar

Joined: May 7th, 2007, 3:03 pm
Posts: 22087
Location: Silver Spring, MD
Any ladder currently sold in the US should be fine, but occasionally less expensive bolts that can rust are substituted for the proper rust free bolts. Usually the simplest thing to do is to purchase stainless steel bolts of the correct size to replace your existing bolts.



_________________
19K gal, vinyl, 1/2 HP WhisperFlo pump, 200 sqft cartridge filter, AutoPilot Digital SWG, Dolphin Dynamic cleaning robot
TFP Admin. Creator of The Pool Calculator. Other handy links: Support this site, TF Test Kits, Pool School
Offline
 Profile  
 
 Post subject: Re: A good ladder for inground Salt water pool?
PostPosted: March 18th, 2010, 12:08 pm 
Registered User
User avatar

Joined: July 4th, 2009, 10:29 am
Posts: 21
Yeah, I am going to have a good look at the bolts anyway. My brother in law is into sailing and they have issues with SS bolts anyways.

I guess the follow up on my question is "Is there a place on the web that separates ladders especially for SWG pools. I found that on one of the major sites, but can't seem to re-find it. They had replacement steps and bolts in addition to coated SS ladders.

Thank You



_________________
40'x20'x8' to 3', Vinyl IG with brick coping, built/opened 04/2006
Hayward S244T Pro-series 300lb Sand Filter - vari-flo XL valve
Goldline Controls Aquarite Turbo Cell SWG t-cell 15
Hayward SP2607X10 Pump w/ Century Centurion .75HP motor (4th motor in 4 years all under warranty) Polaris 360
Offline
 Profile  
 
 Post subject: Re: A good ladder for inground Salt water pool?
PostPosted: March 18th, 2010, 4:10 pm 
Special Contributor
Special Contributor

Joined: April 15th, 2007, 9:48 pm
Posts: 1141
Location: Ft Lauderdale, Florida
There's nothing with a Salt System that would require you to have to look for a Salt Specific Ladder.

Having said that, there are PVC coated ladders and rails. I'll see if I can find a link.



_________________
Sean Assam
Commercial Products Sales Manager
Aqua Cal Heat Pumps
AutoPilot Salt Chlorine Generators
www.autopilot.com
www.aquacal.com
sean@teamhorner.com
Offline
 Profile  
 
 Post subject: Re: A good ladder for inground Salt water pool?
PostPosted: March 18th, 2010, 8:06 pm 
Lifetime Supporter
Lifetime Supporter

Joined: November 12th, 2009, 2:12 pm
Posts: 321
Location: Indialantic, FL
I have no personal experience, but have heard a good review of the SR Smith "Sealed Steel" rails.



_________________
Geometric 16X36', 16K gal, shotcrete, exposed aggregate plaster, acrylic coated concrete deck/cantilever coping; Pentair equipment suite (EasyTouch w/wireless, 2 Intellibrites, Intelliflo VS-3050, C&C 200 Filter, IC-40 SWG); Heliocol solar panels, Rocky's Roller, Blue Diamond robot
Offline
 Profile  
 
 Post subject: Re: A good ladder for inground Salt water pool?
PostPosted: March 18th, 2010, 8:58 pm 
Registered User
User avatar

Joined: July 4th, 2009, 10:29 am
Posts: 21
Thanks for the reply.



_________________
40'x20'x8' to 3', Vinyl IG with brick coping, built/opened 04/2006
Hayward S244T Pro-series 300lb Sand Filter - vari-flo XL valve
Goldline Controls Aquarite Turbo Cell SWG t-cell 15
Hayward SP2607X10 Pump w/ Century Centurion .75HP motor (4th motor in 4 years all under warranty) Polaris 360
Offline
 Profile  
 
Display posts from previous:  Sort by  
 Page 1 of 1 [ 6 posts ] 


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  


TroubleFreePool.com The Web